CHECk FOR COlOUR FASTNESS
Before cleaning carpet/upholstery, test for colour fastness. Dampen a white cloth
with solution. Test in an inconspicuous area. Gently rub the cloth over the area.
Check each colour for colour bleeding. If the cloth remains clean, it should be safe
to clean the carpet/upholstery.
ATTACH UPPER HANDLE
To attach the upper handle
stand the base in the
upright position. Assemble
the mid section onto the
base, taking care not to
trap internal mains wire.
Insert the two nuts into the
recesses located on the
left and right sides of the
base. While holding the
nuts in place, insert the
two medium length screws
through the front of the
mid section and tighten.
Fit the handle into the
main body of the unit.
Hold the nut in place,
insert the long screw
through the front of the
upper handle and tighten.
ASSEmBlY
To assemble the hose/
tool caddy (some models
only) align the tabs on the
hose/tool caddy with slots
on the mid section and
snap into place.
Place nut into recess on
hose/tool caddy and hold
into place. Press handle
release with your other
hand to tilt the midsection
backwards.
Place screw through
centre of lower midsection
and tighten.
CaUTiOn
To reduce the risk of fi re, electric shock, or
injury: ensure the power cord is out of the
way before attaching the upper handle.
8
