Dirt Devil DDC06-E01, Руководство пользователя

Страница: 14 / 16

14
5.5 TroUbleshooTinG
noTe:
If you were unable to solve the problem using the information in the table above, please contact
our Customer Service (UK) 0330 026 2626 .
IMPORTANT: Risk of injury! Never use a faulty machine! Always switch off the machine and disconnect it from the
mains before starting troubleshooting > chapter 4.3, "Switching off".
Problem Solution
Why won’t the
vacuum cleaner
pick up?
The dirt container is full. Empty the dirt container > Chapter 5.1,
'Emptying the dirt container'.
The filters are dirty. Clean the filter > Chapter 5.2, 'Cleaning
dirt container and pre-motor filter' or > Chapter 5.3, 'Check the
post-motor filter'.
Tool/accessory, extension tube or suction hose is blocked.
Remove the obstruction. If necessary, use a long wooden stick
(e.g. a broomstick) to do this.
The air vent is open. Close the air vent (Fig. 4.6).
The attached tool/accessory, is unsuitable. Change the tool/
accessory, > Chapter 3.2, 'Selecting a tool/accessory'.
The position of the 'carpet/hard floor' selector (Fig. 4.4/Fig.
4.5) is inappropriate. Set the 'carpet/hard floor' selector to the
correct position for the type of floor, > Chapter 4.2,
'How to Use'.
Why does my
vacuum cleaner
have no power?
The motor thermostat may have tripped. If this has happened,
unplug the vacuum cleaner. Remove and empty the dirt
container and check the hose for blockages. Clean the filters
and allow the vacuum cleaner to cool for approximately 1 hour
(if you have washed the filters you will need to wait 24 hours
for the filters to fully dry before putting them back into the
vacuum cleaner).
The plug may not be fully pushed into the electrical socket.
Check the fuse in the plug if this needs replacing, always
replace with a British 13amp fuse.