DirekTronik VMS200, Руководство пользователя, Страница: 29 / 98

25
(2) The following steps will guide you to set the automatic cruise of the speed dome or
cameras with a PT head ：
A. Enable the PTZ control functions for a PTZ camera
：
(A) Open the Configurations page.
(B) Select a specific Speed Dome Camera item in the IP Camera tree list.
Note
：
The speed dome camera will be listed under the node, “IP Camera”,
(Figure 2-12).
(C) Switch tab to General , and check the PTZ Enable .
(D) Users will also need to set the following setting for an “IP Camera”
：
“Protocol”, “Baud Rate”, “Address ID”, and "Home Position" (Figure 2-12).
Figure 2-12
B. Setup the preset point (Figure 2-13)
(A) Click the PTZ icon which is located at the Live View page (Figure 2-13, ).
(B) Adjust the PTZ angle of the cameras to focus at a specific range which you
want to monitor. (Figure 2-13)
(C) Click on the set button and a dialog box which is named “PRESET” will be
pop-up. (Figure 2-13, )
(D) Select the “Preset” No. and input an appropriate description for the specific
“Preset Position”. Click the button Set Preset to setup a preset position or