28-0014 GSM REMOTE CAMERA USER MANUAL
17
user can leave the camera place during this time to avoid misalarm.
Method 1:
The user sends following SMS message in order to:
Arming TUTA camera manually:
#01#
(23)
Method 2:
Press
on the remote control, whilst poi nting it in the di rection of TUT A
camera. TUTA camera will emit a “Beep” tone, to indicate that arming TUT
A
camera is successfully. (Refer remote control instruction parts)
4.3.2 Camera alarm
Once the camera be triggered, the LED will flash fast in green, then turn red and flash
fast. It will sending alarm SMS, MMS or make voice calling acc ording to the setting.
After it finish alarm process, ca mera will enter 20 seconds alarm-suspension period
and then it can alarm again.
4.3.3 Disarming TUTA camera
When user disarm the TUT A camera, all l oaded wireless sensor, integrated infrared
body detector could not work. But it can send alarm only when the
button on
remote control is pressed.
Method 1:
The user sends following SMS message in order to:
Disarming TUTA camera manually
: #02#
(24)
Method 2:
Press the
button on the remote control, t he camera will emit a BEEP tone and
the indicator light will flashing green to sh ow the TUTA disarm successfully. (Refer
remote control instruction parts.)
4.3.4 Timed arming the camera
Master
and
family
users send following SMS message in order to:
Enable timing arms the camera:
#128#1#
(25)
Set time period to arm the camera
:
(26)
#129#
WorkDay
#
ArmTime1
#
DisarmTime1#...#ArmTime3
#
Disarm
Time3#
Disable timing arm the camera:
#128#0#
(27)
•
WorkDay
: The value description is same with command 21.
•
Up to 3 periods be allowed per workday . Each period time should set by
