7
Operating Instruction
8. EDID Management
EDID mode:Build-in EDID(default),Copy EDID.
There are 8 kinds of EDID groups switch for each input:
EDID
groups
Indicator status
EDID instruction
0001
Input1 flickering
Def1：4K60HZ-YUV444-8bit/2CH
0010
Input2 flickering
Def2：4K60HZ-YUV420-8bit/2CH
0011
Input2 flickering
Def3：4K30HZ-YUV444-8bit/2CH
0100
Input3 flickering
Def4：1080P-YUV444-8bit/2CH
0101
Input3 flickering
Copy output1
0110
Input3 flickering
Copy output2
0111
Input3 flickering
Copy output3
1000
Input4 flickering
Copy output4
Operation steps:
1. Change EDID for input1:long press (about 1s) button in output1 area,enter EDID mode for
modification,input1/2/3/4 indicators in output1 area will start flickering,please refer to above table for
EDID instruction,for example,if input1 flickering only,it represent current EDID is”
Def1：
4K60HZ-YUV444-8bit/2CH
”,short press this button will switch to next EDID,long press (about 1s)
button in output1 area again,exit EDID mode.
2. Change EDID for input2:long press (about 1s) button in output2 area,enter EDID mode for
modification,input1/2/3/4 indicators in output2 area will start flickering,then same operations to EDID
change of input1.
3. Change EDID for input3:long press (about 1s) button in output3 area,enter EDID mode for
modification,input1/2/3/4 indicators in output3 area will start flickering,then same operations to EDID
change of input1.
4. Change EDID for input4:long press (about 1s) button in output4 area,enter EDID mode for
modification,input1/2/3/4 indicators in output4 area will start flickering,then same operations to EDID
change of input1.
EDID switching sequence:Build-in EDID
Copy EDID
5. Or you can wait 10s without any operation,automatically save the setup and exit EDID Mode.
