Operating Instructions
7. LED status indicator and button instruction
1. The device includes one LED status indicator: yellow data transmission indicator
The indicator always on when data transmission stable through WIFI;Otherwise, the indicator
will flickering.
2. Reset button: when power on, long press the reset button 5S to reset the device.
3. Pairing button:long press the pairing button on both TX and RX simultaneously(about 6S) until
the data transmission indicator(located in the middle of the panel) goes out.
under one to many or many to one application, able to switch between input and output by short
press pairing button.
NOTED:
Under one to many mode, when one channel output signal is weak,it will be automatically switched
to the one channel output with strong signal.
7
