Gigabit Ethernet Media Converter
User’s Manual
3
FCC Statement
The FCC (Federal Communications Commission) restricts the amount of radio
frequency emission and radiation coming from computer equipment.
The equipment introduced in this manual has been tested and found to comply with
the limits for a Class A digital device pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user is required to correct the interference at his/her
own expense.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.
Trademarks
Product names mentioned in this manual may be trademarks or registered
trademarks of those products.
All trademarks or brand names mentioned are properties of their respective
companies.
Preface
This manual describes how to install and use the Gigabit Ethernet Media Converter.
The Converter introduced here provides one channel media conversion solution:
1000Base-T to 1000Base-SX/LX (multi-mode/single-mode) with
link-fault-pass-through function
1000Base-T to 1000Base-LX (WDM single-mode) with
link-fault-pass-through function
The Gigabit Ethernet Media Converter fully complies with IEEE802.3ab
1000Base-T and IEEE802.3z 1000Base-SX/LX Gigabit Ethernet standards.
In this manual, you will find:
y
Product
overview
y
Features on the media converter
y
Illustrative
LED
functions
y
Installation
instructions
y
Specifications
