12
PROGRAMMING OTHER DEVICE CONTROL
(continued)
4.
Aim the DIRECTV Universal Remote Control at
the device and press
Power
once. The device
should turn off. If it does not, repeat steps 2
and 3, trying each code for your brand until
you find one that works. If it still does not
work, try
Searching For Your Code
on page 23.
NOTE: If the device does not have a
Power
key, press
the (
Play
) key.
5.
Repeat steps 1 through 4 for each device you
want the the DIRECTV Universal Remote
Control to control. For future reference, write
down each working device code in the boxes
on the next page:
TV Code:
VCR Code:
AUX Code:
PROGRAMMING TV/VCR COMBO CONTROL
If you own a TV/VCR Combo, perform the following
instructions to control this device:
1.
Turn on your TV/VCR Combo and insert a
video cassette.
2.
On the DIRECTV Universal Remote Control,
press
VCR
once. Press and hold
Setup
until the
VCR
key blinks twice, then release
Setup
.
3.
Use the
Setup Codes For TV/VCR Combos
(on
page 19) to locate the brand name and then
enter the first four-digit code for your TV/VCR
Combo. If you perform this procedure correctly,
the
VCR
key will blink twice.
NOTE: If the
VCR
key did not blink twice after enter-
ing the code’s last digit, then repeat steps 2 through 3
and try entering the same code again.
DirecTV Mnl MDTV6 3/21/03 2:04 PM Page 12
Содержание Universal Remote Control
Страница 1: ...DIRECTV Universal Remote Control User s Guide ...
Страница 32: ......
