DirecTV H10, Руководство пользователя

Страница: 95 / 104

Chapter 5
91
4
Reorient or relocate the receiving satellite dish antenna.
4
Increase the separation between the equipment and the DIRECTV HD Receiver.
4
Connect the equipment into an outlet on a circuit different from that to which the
DIRECTV HD Receiver is connected.
4
Consult the dealer or an experienced radio/TV technician for help.
The user may find the following booklet, prepared by the Federal Communications
Commission, helpful: “How to Identify and Resolve Radio and TV Interference Problems.”
This booklet is available from the U.S. Government Printing Office, Washington, DC. To
meet FCC requirement, only peripherals (computer input/output devices, terminals, printers,
etc.) certified to comply with Class B limits may be attached to this device. Operation with
non-certified peripherals is likely to result in interference to radio and TV reception. To meet
FCC requirements, shielded cables are required to connect the device to a personal computer,
peripheral, or other Class B certified device.
This equipment complies with Part 68 of the FCC Rules and the requirements adopted by
ACTA. On the back of this equipment is a label that contains a product identifier in the
format US:AAAEQ##TXXXX. If requested, this information must be provided to your
telephone company. A plug and jack used to connect this equipment to the premises wiring
and telephone network must comply with the applicable FCC Part 68 rules and requirements
adopted by ACTA. A compliant telephone cord and modular plug is provided with this
product. It is designed to be connected to a compatible modular jack that is also compliant.
See installation instructions for details.
The REN is used to determine the number of devices that may connect to a telephone line.
Excessive RENs on a telephone line may result in the devices not ringing in response to an
incoming call. In most but not all areas, the sum of the RENs should not exceed five (5.0)
FCC Customer Information