V 1.3 Tatmar LLC 2010
All Rights Reserved
5
2.
User Functions
2.1 How to turn your DIRECTUS GPS NAVIGATION Mirror On and Off
•
Press and hold
Power Button
for 1 to 2 seconds, the unit will power on.
•
Press and hold
Power Button
for 1 to 2 seconds again to turn the mirror off.
•
(Pressing the button for less than 1 to 2 seconds, user will hear a beep followed by the device
switching to the VIDEO 2 input.)
2.2 Indication Light Functions
•
The Lights will be illuminated on the face of the buttons when the mirror is powered on.
•
Pairing indication button will
blink
while pairing your Bluetooth enabled phone.
•
When your Bluetooth enabled phone has paired successfully the light will stay illuminated.
2.3 Start-up Instructions
•
During the start-up process only the
Power Button
is active.
•
Once the mirror has completely powered on all other buttons will now be active.
•
Reverse camera is not active until mirror is at main screen
2.4 GPS Antenna
•
The DIRECTUS GPS NAVIGATION hardware receives its GPS signal from satellites.
•
These GPS signals are strongest in an unobstructed view of the sky.
•
Obstructions like tall buildings, bridges, trees, and tunnels will weaken and in some cases block
the signal completely.
•
If this happens you should move the car to a place with a clear view of the sky and wait
approximately 1-5 minutes to re-establish the signal.
•
For a stronger signal, please make sure the antenna on the backside of mirror is open to a 90
degrees position.
•
DO NOT attach, hang, or stick anything onto the GPS antenna.
2.5 Touch Screen Pre-cautions
•
The touch screen is made from a special electronic-resistance material, and is very sensitive to
temperature, humidity, and pressure.
•
In order to keep the touch screen in good working condition, user should not operate in extreme
temperatures.
•
DO NOT USE sharp objects on the touch screen, this could scratch the screen and reduce the
visibility of the image.
•
DO NOT clean the case of the mirror or the touch screen surface with water, organic solvent or
ammonia-based solvent such as window cleaner. Please use a special-purpose micro-fiber cloth
to clean the mirror and touch screen.
•
Please use the calibration tools under Settings Menu to adjust the calibration of the touch screen.
2.6 Environmental Precautions
•
Avoid operating the mirror in extreme temperatures.
•
DO NOT place any other electronic devices close to the mirror in order to avoid any interference.
