DirectOut Technologies split.converter, Руководство пользователя

Страница: 18 / 24

page 18 of 24 SPLIT.CONVERTER Manual - Version 2.0
CHAPTER 4: Operation
Signal Routing
All four MADI input signals are fed to a routing matrix where they can be
distributed to any output. This allows the SPLIT.CONVERTER to convert and
distribute MADI signals:
PORT A
(ABCD)
Encoder
Turn the rotary control to the desired position to
select the desired input source for output A.
PORT B
(ABCD) Encoder
Turn the rotary control to the desired position to
select the desired input source for output B.
PORT C
(ABCD) Encoder
Turn the rotary control to the desired position to
select the desired input source for output C.
PORT D
(ABCD)
Encoder
Turn the rotary control to the desired position to
select the desired input source for output D.
NOTE
• The ports are independent from each other, the MADI signals are not required
to be in sync to each other.
• The routing is bit transparent and works without delay, even proprietary
adaptions of MADI will pass through the unit in their native state.
• All common sample rates (up to 192 kHz) and MADI formats (48k/96k frame,
56/64 channels) are supported.