P a g e
|
2
DSEFO222-22 Rev 2/21
PARTS LIST
Note: All hardware is Stainless Steel unless otherwise noted.
Anti-Seize Compound
- Apply a small amount of the supplied Anti-Seize Compound to the aluminum joints and
to the threads of the U-Bolts to prevent galling.
CAUTION:
While we strive to remove all burrs from all machined parts, there is always the possibility of
sharp edges. We strongly suggest checking the edges and use a fine file, or 400 grit sandpaper,
to remove any burrs that may have been left.
Tools needed: #2 Phillips screwdriver
¼” flat blade screwdriver
soldering gun or large iron
rosin core solder
large needle nosed pliers
keeper installation tool (supplied with kit)
ruler with metric millimeter markings
marking pencil
Boom
Boom Sag Hardware Bag
1 1/4" OD x 0.058" x 72" rear (Black on one end)
1
Boom Sag Bracket
2
w/ coax/balun assy attached
2" Long tangent U-bolt
1
1 3/8" OD x 0.058" x 72" rear mid (Black / Red)
1
2" Saddle
1
1 1/2" OD x 0.058" x 72" center (Red / Blue)
1
Aluminum spacer
2
1 3/8" OD x 0.058" x 71 1/2" front mid (Blue / Green)
1
10-32 Machine screw
2
1 1/4" OD x 0.058" x 69 1/4" front (Green on one end)
1
10-32 NyLock® nut
2
5/16" Split lock washer
2
Boom Sag
5/16" Flat washer
6
72" x 3/4" aluminum flattened on one end
2
5/16" Hex nut
2
48" x 5/8" aluminum flattened on one end
1
5/16" NyLock® nut
2
24" x 5/8" aluminum flattened on one end
1
3/4" Hose clamp
2
Element bundle
Boom to Mast Hardware Bag
3/16" elements
22
5/16" x 2" U-bolt
2
Brass T-arms
2
2" Saddle
2
5/16" Nut
4
Hardware Bag
5/16" Split lock washer
4
8-32 x 1 3/4" Machine screw
4
5/16" Flat washer
4
#8 Split lock washer
4
1/4" x 1 1/2" U-bolt
2
#8 Hex nut
4
1 1/2" Saddle
2
Brass shorting bars
2
1/4" Nut
4
Hex wrench
1
1/4" Split lock washer
4
1 1/2" Hose clamp
4
1/4" Flat washer
4
3/16" Element insulators
46
3/16" Keepers
48
Boom to Mast plate
1
1 1/4" Black End Caps
2
Anti Seize Compound
1
Element assembly tool
1
Assembly instructions
1
