Directed Xpresskit DBALL-NISS08EU Скачать руководство пользователя страница 9

Страница: 9 / 10

Rev.: 20200502

Platform: DBALL2

Firmware: NISS08EU

Page 9

LED

Status

Description

Troubleshooting

Module Progra m m ing

Off

Module has no power.

Check the power connections.

Solid red

W aiting to begin the
programming sequence.

Make sure that the CAN connections are correct and
press PTS to turn ignition ON.

Solid green for
3 seconds

Module was successfully
programmed.

Normal operation

Ex te rna l Module Synchronisa tion

Flashes red,
red, then
orange x 10

OBDII feature not supported.

Diagnostic data bus not detected. Some features are
not supported by SmartStart. This can be caused by
missing wire connections or module hardware limitation.
Refer to the wiring installation section to check the
connections.

Active Ground W hile Running

Flashes green

GROUND OUT ON (GW R)
command received.

Otherwise, the Ground W hile Running (status) signal
was lost or was never received by the module.
Commands can come from RF, D2D or W 2W .

Flashes red &
orange

IGNITION ON command received.

Otherwise, the ignition signal was not received by the
module. In a W 2W install, it will show only if the ignition
input wire is used.

Flashes green
quickly

START ON command received.

Otherwise, the start signal was not received by the
module. In a W 2W install, it will show only if the ignition
input wire is used.

D2D a nd W 2W Com m a nds

Flashes orange
x 1

LOCK command received.

Flashes orange
x 2

UNLOCK command received.

Flashes orange
x 3

TRUNK command received.

If the bypass module fails to flash, it means the module
did not receive the signal. Commands can come from
RF, D2D or W 2W .

Solid

Solid
green
x3 sec

Flashes
green

Flashes
orange
x1

Flashes
orange
x2

Flashes
orange
x3

Off

Flashes
red, red,
orange

Flashes red
& orange

LED Diagnostics & Troubleshooting

Содержание Xpresskit DBALL-NISS08EU











Результаты поиска

Содержание Xpresskit DBALL-NISS08EU

Отзывы:

Бренды по названию

Популярные бренды

Directed Xpresskit DBALL-NISS08EU, Руководство по установке

Результаты поиска

Содержание Xpresskit DBALL-NISS08EU

Отзывы:

Бренды по названию

Популярные бренды