Directed Viper 4105V, Руководство пользователя

Страница: 15 / 23

12 © 2016 Directed. All rights reserved.
Pairing a Remote Control
Your system comes with the remote controls already programmed, how-
ever, if you are replacing or adding additional remote controls, they
must be paired to the system prior to operating the system. To pair the
remote, you need to know where the Control button is located. If the
horn honk is not connected, the main unit LED needs to be visible for
visual confirmation. If you cannot locate or access the main unit, it is
recommended that you visit your authorized dealer to pair the remote.
The system is capable of accepting up to four remote controls.
1.
Turn
key to the ON position
2. Within 10 seconds,
press
and release the Control button once.
3. Within 10 seconds,
press
and
hold
the Control button. The LED
on the module flashes one time and the horn (if connected) honks
to confirm entry into remote pairing. Do not release the Control
button.
4.
Press
the
AUX
AUX
AUX
Your 1-way remote coin cell battery can be changed by using a small flat blade screwdriver to pry case apart. Replace battery and then snap case together.
button on the remote control. The horn honks to con-
firm the remote has been paired.
5.
Release
the Control button.
6.
Turn
the key to OFF position. The horn sounds one long honk (if
connected) to confirm that remote pairing has exited.
The programming routine exits if any of the following occurs:
• The ignition is
turned off.
• There is
no
activity for 30 seconds.
• The Control button is
pressed
too many times.