P.24
User Guide
Intrusion Codes via horn
The system monitors the following:
Doors
Hood
Ignition
Note:
If an intrusion has occurred the HORN will sound for a maximum of
1 minute.
If an intrusion has occurred and
pressed, the horn provides an intrusion code
corresponding to the type of intrusion that occurred.
1x = power interruption
4x = Doors intrusion
3x = Hood
6x = Ignition
Vehicle Status Request
The status request feature allows the user to see the status of the vehicle
i.e.:
if the doors are locked or unlocked or if the vehicle is in cold weather mode,
home valet mode, in valet mode or how much time is left in the run time cycle.
The following charts (Tables 1, 2 and 3) indicate the confirmation sequences.
To retrieve the vehicle status:
Press and release the
AUX
button
then press and release the
button (there
will be a beep). The transmitter will then flash the corresponding sequence of
LED
’s depending on the vehicle’s status.
If the engine is NOT running
If the vehicle is in or out of ready mode
If the engine IS running under a remote start (if the doors are locked)
or (if the doors are unlocked).
The status request feature is a two-step procedure:
The first sequence of flashes denotes if the vehicle’s doors are locked
or unlocked.
