Directed SIRIUS FM-SC 1, Руководство по установке пользователя

Страница: 17 / 40

© 2008 Directed Electronics. All rights reserved.
17
Universal Vehicle Interface
Basic Operation
General notes before beginning:
~ 0[[^_TaPcX^]bX]cWXbVdXSTQ^cWQPbXRP]SPSeP]RTSPaT
performed with the Display Control Unit (hereafter DCU)
in a default state (i.e. set to an active channel as shown
below). Many of these commands may not function as
described when the DCU is in a state other than default.
~ 5d]RcX^]bX]cWXbVdXSTd][Tbb^cWTafXbTb_TRXUXTSPaT
performed using the DCU’s control panel but can also be
performed using the remote control’s corresponding but-
tons.
~ 0UcTah^dWPeTbdRRTbbUd[[hPRcXePcTSh^daB8A8DBbdQ
-
scription, the default screen appears (shown below).
%VXzWX2EQI
7SRK8zXPI
434 %
7XEVPzXI
Channel Number Channel Name
Clock
Auto sizing
scrolling
Artist Name
Auto sizing
scrolling
Song Title
Band/Preset
Bank Number Music
Category
Signal
strenght
DEFAULT SCREEN
41
~ FWT]cWTaPSX^Xb_^fTaTS^]cWT_aTeX^db[hbT[TRcTS
channel automatically starts playing. The artist name
and song title of the currently playing song is visible.
~ BXV]P[bcaT]VcWXbX]SXRPcTSQhPbTaXTb^UQPabX]cWT
lower left corner, three bars being the best or maximum
strength, two bars indicating a good signal and one bar
indicating a weak one. The absence of bars indicates no
signal received.
~ ?[TPbTaTPScWTX]bcadRcX^]bRPaTUd[[hb^\TR^]ca^[b
perform different functions when they are pressed and
held. The “Press” command therefore differs from the
“Press and Hold” command when used in this guide. The
former is a momentary press and quick release while
the latter refers to pressing and holding the button for at
least 1½ seconds.
~ 8]\P]hX]bcP]RTbXU]^bT[TRcX^]^aPRcXeXchXbbT]bTS
within several seconds of entering a new screen/menu,
the DCU automatically reverts to default, without saving
any of the new settings pertaining to that screen.