Directed Nanocam+ NCP-DVRW2S, Руководство пользователя

Страница: 11 / 48

11
5.0 GETTING STARTED
Before you start, the Dash Camera will need a Micro SD card installed.
The Dash Camera will also need to be installed into your vehicle and connected to your power
source to operate.
5.1 SETTING UP THE MICRO SD CARD IN YOUR DASH CAMERA
A Micro SD card will be required, class 10 or higher (you will need to purchase separately)
• The Micro SD card will need to formatted before use (see instructions on page 34).
• Insert the Micro SD card only when the Dash Camera is powered OFF.
To insert the Micro SD card properly:
• Turn off the Dash Camera and point the screen towards you.
• Insert the Micro SD card into the slot on the left-hand side of the Dash Camera. Push
the Micro SD card in until a slight click is heard, and it feels secure.
In order to remove the Micro SD card:
• Turn off the Dash Camera and push the Micro SD card in, until a click is heard.
This indicates the Micro SD card has been released and can be pulled out with your fingers.
5.2 INSTALLING YOUR DASH CAMERA
• Clean the inside of your windscreen and select a place to mount your Dash Camera.
• Remove the protective stickers from the Dash Camera and the 3M mount.