Directed Digital System MIT4
© 2015 Directed. All rights reserved.
Quick Reference Guide – Autostart (Regular Key)
Manual transmission ready/idle mode sequence
1
While the vehicle is running, put the gear in
Neutral
(N).
Put
gear in
Neutral
2
Depress the vehicle’s foot brake.
Depress
brake
pedal
3
Apply the emergency brake twice (2), then release
the vehicle's foot brake and skip to step 5.
Apply emergency
brake x1
OR
2
Release
brake pedal
&
OR
Apply the emergency brake, then release the vehicle's
foot brake.
Warning!
Depressing the brake pedal again after this
step will disable the remote start feature.
4
Within 10 seconds, press any button on the
transmitter.*
14:36
Press any
button*
5
The parking lights flash 5 times confirming that the
remote start feature is active.
Note
: If the parking lights do not flash 5 times, you
have not entered manual transmission sequence and
will need to repeat steps 1 to 5.
Parking lights flash x5
6
Turn ignition OFF and remove the key from the
ignition barrel.
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
7
Exit the vehicle.
Exit vehicle
Vehicle takeover with regular key
1
Close the vehicle doors, hood and trunk, then
press the
Remote Start
button on the transmitter to
start the vehicle.*
Press Remote
Start button*
14:36
2
Press the
Unlock
button on the factory or
aftermarket remote.*
Press Unlock on
either remote*
PANIC
14:36
OR
Complete the following steps within 45 seconds or the vehicle will shut down.
3
Enter the vehicle and turn the key into ON
position.
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
4
Depress the brake pedal, put the car in gear and
drive off.
Ready to
drive off
* Your aftermarket remote may differ from the model shown in the illustrations.
