28
DS4+ TL8
© 2017-08-23 Directed. All rights reserved.
Connecting the module
Important!
Before connecting the DS4+, it is important to ensure that the proper feature and function programming is selected using the
configuration wizard. Visit www.directechs.com to use the latest version of the online tool.
Flashing a module using your computer:
1.
Disconnect
the main module from any (+) 12V power source, then
connect
it to your computer using the
XKLoader2
.
2. Go to
www.directechs.com
using Internet Explorer; the configuration wizard will be displayed automatically.
3. Follow the instructions in the pop up window that will be displayed when the module is detected.
Flashing a module using your smartphone or tablet:
1.
Disconnect
the main module from any (+) 12V power source, then
connect
it to the
XKLoader3
.
2. Launch the
Directechs Mobile
app on your smartphone or tablet.
3. Select
FLASH YOUR MODULE
and follow the on-screen instructions.
When the flashing operation is successful, you can proceed with the instructions below.
Additional connections required for vehicles equipped with a manual transmission (if not supported by firmware)
Connection
Description
(-) E-Brake Status Input
(Black/White, pin 17)
Must be connected to a working emergency brake in the vehicle. Although most vehicles have simple
(-) trigger emergency brake circuits note some vehicles do not and may require unique integration
methodologies.
(-) Door Trigger Input
(Green, pin 20) OR
(+) Door Input (Violet, pin
13)
Must be connected to a working door trigger in the vehicle, which monitors all doors. The unit must monitor
the door pins to allow the Ready Mode process to be enabled.
Note
: Some vehicles may require unique integration methodologies for this circuit.
(AC) Tachometer Input
(Violet/White, pin 22)
Must be connected to a working tachometer signal in the vehicle (fuel injector, ignition coil, true tach, etc.)
and learned successfully to the DS4+.
Note
: Refer to www.directechs.com for more information.