Wiring connections
The wiring connections listed below are specific to this firmware.
Main power harness (H1), 12-pin thick gauge connector
Conn./Pin
Color
Description
H1/1
White
Relay 3 COM – – No Connection
1
H1/2
White/Brown
Relay 3 N.O. – No Connection
1
H1/3
Brown/Red
Relay 2 N.O. – No Connection
H1/4
Yellow/Red
Relay 2 COM – Accessory Interrupt (connector side)
H1/5
Orange/Red
Relay 2 N.C. – Accessory Interrupt (vehicle side)
H1/6
Yellow
Relay 1 COM – Ignition Interrupt (vehicle side)
1
H1/7
White
Relay 3 COM – No Connection
1
H1/8
White/Brown
Relay 3 N.O. – No Connection
1
H1/9
Black
(-) Ground
H1/10
Red
(+) 12 Volt (battery)
H1/11
Orange/Yellow
Relay 1 N.C. – Ignition Interrupt (connector side)
1
H1/12
Brown
Relay 1 N.O. – (+) Power 12 Volt
1
Auxiliary output harness (H2), 16-pin black connector
Conn./Pin
Color
Description
H2/1
Violet/Brown
(MUX) Parking Lights Output
H2/2
Yellow/Black
Immo. Data
H2/3
Orange/Black
No Connection
H2/4
Tan
HS CAN 1 Low
H2/5
Tan/Black
HS CAN 1 High
H2/6
Light Green
No Connection
H2/7
Orange/Green
HS CAN 2 High
H2/8
Orange/Brown
HS CAN 2 Low
H2/9
Violet/Green
No Connection
H2/10
Green/Black
No Connection
2
H2/11
White/Violet
No Connection
2
H2/12
White/Red
No Connection
2
H2/13
Lt. Blue/Black
No Connection
2
H2/14
Green/Red
No Connection
2
H2/15
N/A
No Connection
H2/16
Violet/Yellow
No Connection
1. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed.
2. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. Note that they are low current and a relay
may be necessary.
6
Directed Digital Solutions HK14
© 2019-11-15 Directed. All rights reserved.
