Directed Directechs DB3 Скачать руководство пользователя страница 20

20

403.NISS3HT 3.09 2009 Nissan Altima (Smart Key)
© 2020-08-12 Directed.  All rights reserved.

Limited one year consumer warranty

For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed 
Electronics. (“DIRECTED”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the 
security or remote start accessory piece (hereinafter the “Part”), which proves to be defective in workmanship or material under 
normal use, provided the following conditions are met: the Part was purchased from an authorized DIRECTED dealer; and the 
Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following 
information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete product and Part 
description. 

This warranty is nontransferable and is automatically void if the Part has been modified or used in a manner contrary to its 
intended purpose or the Part has been damaged by accident, unreasonable use, neglect, improper service, installation or other 
causes not arising out of defect in materials or construction. 

TO THE MAXIMUM EXTENT ALLOWED BY LAW, EXCEPT AS STATED ABOVE, ALL WARRANTIES, INCLUDING BUT NOT 
LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR 
PURPOSE AND WARRANTY OF NONINFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND 
DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION 
OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED HEREBY DISCLAIMS AND HAS ABSOLUTELY NO 
LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING DEALERS OR INSTALLERS. DIRECTED IS NOT OFFERING 
A GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE, OR THEFT OF THE AUTOMOBILE, ITS PARTS OR 
CONTENTS, AND DIRECTED HEREBY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, 
LIABILITY FOR THEFT, DAMAGE, OR VANDALISM. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR 
ITS SUBSIDIARY, THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE 
LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER 
ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE 
OF THE PART. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT 
LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME, LOSS OF 
EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, 
THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR AT DIRECTED’S OPTION THE PART AS 
DESCRIBED ABOVE.

This warranty only covers Parts sold within the United States of America and Canada. Parts sold outside of the United States of 
America or Canada are sold “AS-IS” and shall have NO WARRANTY, express or implied. Some states do not allow limitations 
on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty 
gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not 
authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part.
For further details relating to warranty information of Directed products, please visit the support section of DIRECTED’s website at: 
www.directed.com

920-10012-01 2013-07

This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select 
vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide.  DISCLAIMER: Under 
no circumstances shall the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held  liable for any 
consequential damages sustained in connection with the part(s) installation. The manufacturer and it’s distributors will not, nor will 
they authorize any representative or any other individual to assume obligation or liability in relation to the interface kit / data bus 
interface part(s) other than its replacement. N.B.: Under no circumstances shall the manufacturer and distributors of this product be 
liable for consequential damages sustained in connection with this product and  neither assumes nor authorizes any representative 
or other person to assume for it any obligation or liability other than the replacement of this product only.

Protected by U.S. Patents: 5,719,551; 6,011,460 B1 *; 6,243,004 B1; 6,249,216 B1; 6,275,147 B1; 6,297,731 B1; 6,346,876 B1; 6,392,534 

B1; 6,529,124 B2; 6,696,927 B2; 6,756,885 B1; 6,756,886 B2; 6,771,167 B1; 6,812,829 B1; 6,924,750 B1; 7,010,402 B1; 7,015,830 

B1; 7,031,826 B1; 7,046,126 B1; 7,061,137 B1; 7,068,153 B1; 7,205,679 B1; Cdn. Patent: 2,320,248; 2,414,991; 2,415,011; 2,415,023; 

2,415,027; 2,415,038; 2,415,041; 2,420,947; 2,426,670; 2,454,089; European Patent: 1,053,128; Pat. Pending: 2,291,306. Made in Canada.

Содержание Directechs DB3























Отзывы: