Directed DB3 403.KIA8, Руководство по установке, Страница: 8 / 20

8
403.KIA8 1.07 2020 Kia Forte5 (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.
Vehicle connections
The connection information listed below is specific to the 2020 Kia Forte5 (Smart Key). Refer to “Pre-installation and application warnings” for a list of important notes.
Data 14-pin blue connector (H1)
Module Connects To
Conn./Pin Color Description Wire Location (+/-) Wire Color
H1/1 Light Green No Connection No Connection
H1/2 Violet/Yellow No Connection No Connection
H1/3 Tan/Black HS CAN 3 High ICU Junction Block-Dash Fuse Box, rear, white 32 pin plug (G), pin 12 Data Yellow (P-CAN)
H1/4 Tan HS CAN 3 Low ICU Junction Block-Dash Fuse Box, rear, white 32 pin plug (G), pin 11 Data Blue (P-CAN)
H1/5 Orange/Green HS CAN 2 High ICU Junction Block-Dash Fuse Box, rear, white 32 pin plug (G), pin 16 Data White (B-CAN)
H1/6 Orange/Brown HS CAN 2 Low ICU Junction Block-Dash Fuse Box, rear, white 32 pin plug (G), pin 15 Data Brown (B-CAN)
H1/7 Brown Relay 1 N.O. - No Connection No Connection
H1/8 Yellow Relay 1 COM -Ignition Interr. (conn. side) ICU Junction Block-Dash Fuse Box, rear, white 54 pin plug (E), pin 40 Cut Pink
H1/9 Orange/Yellow Relay 1 N.C. - Ignition Interr. (veh. side) ICU Junction Block-Dash Fuse Box, rear, white 54 pin plug (E), pin 40 Cut Pink
H1/10 Orange/Red Relay 2 N.C. - Immo. Data Interr. (veh. side) Driver Kick, red 68 pin plug (EM11), pin 11 Data Brown/Orange
H1/11 Yellow/Red Relay 2 COM - Immo. Data Interr. (conn. side) Driver Kick, red 68 pin plug (EM11), pin 11 Data Brown/Orange
H1/12 Brown/Red
Relay 2 N.O. - 12V Input
[3] ICU Junction Block-Dash Fuse Box, black 4 pin plug (A), pin 3
5K - 10K Resistor + Blue (60A)
H1/13 Red W2W Only - (+) 12 Volt Remote Starter
H1/14 Black W2W Only - (-) Ground Remote Starter
Output 12-pin red connector (H2)
Module Connects To
Conn./Pin Color Description Wire Location (+/-) Wire Color
H2/1 Black/White No Connection No Connection
H2/2 Green/Black (-) PTS 1 Output Start Stop Button Switch, gray 10 pin plug, pin 9 - Yellow/Black
H2/3 Green/White W2W Only – (-) Door Status Output Remote Starter
H2/4 Red/Black (-) PTS 2 Output Start Stop Button Switch, gray 10 pin plug, pin 10 - Yellow/Orange
H2/5 Violet/White
W2W Only – (AC) Tach Output
[2] Remote Starter
Tach wire is an optional connection required on some remote starters, which
do not support a tach signal in D2D.
H2/6 Gray No Connection No Connection
H2/7 Gray/Black No Connection No Connection
H2/8 Violet/Green No Connection No Connection
H2/9 Violet/Brown (MUX) Parking Light Output Headlight-Wiper Switch, black 16 pin plug, pin 14 MUX Blue
H2/10 Yellow/Black No Connection No Connection
H2/11 Orange/Black Immo. Data (conn. side) Driver Kick, red 68 pin plug (EM11), pin 11 Data Brown/Orange
H2/12 Blue/Red W2W Only – (-) Hood Status Output Remote Starter