10
©
2013
Directed. All rights reserved.
Main Harness 2–Wire Connection Guide
H2/1 BROWN: Driver window up switch side
Cut the up (driver) wire at the switch or motor and connect this wire to the switch side of the wire.
NOTE: In 4 window mode, this wire is used for programming the module.
H2/2 WHITE: Driver window down switch side
Cut the down (driver) wire at the switch or motor and connect this wire to the switch side of the
wire.
NOTE: In 4 window mode, this wire is used for programming the module.
H2/3 RED/WHITE: (-) Auxiliary input
Connect this wire to a (-) validity output channel of the security system.
H2/4 ORANGE: (-) Ground when armed
Connect this wire to the (-) ground when armed output of the security system. This wire can also
be connected to an auxiliary channel of the security system to roll the windows up.
NOTE: The window switch inputs on the 535T are not active when the Orange H2/4 wire has a ground.
With Directed remote start systems, the ground while armed wire also activates when the system is remote
started, to prevent the windows rolling up (when the windows are in the down position and the vehicle is
remote started), program off the anti-grind feature on the Directed system.
H2/5 GRAY: (-) 500 mA Output during activation
Connect this wire to an optional relay to bypass sensors which may trigger the security system
during operation of the 535T or connect to the Gray/Black (-) delay of a secondary 535T to have
the windows stagger when closing. This wire continues to output (-) ground for 5 seconds after the
window motors have stopped.
H2/6 BROWN/BLACK: Passenger window up switch side
Cut the up (passenger) wire at the switch or motor and connect this wire to the switch side of the
wire.
H2/7 WHITE/BLACK: Passenger window down switch side
Cut the down (passenger) wire at the switch or motor and connect this wire to the switch side of
the wire.
