19
403.TL4 4.00 2012 Lexus IS 350C (Smart Key)
© 2019-05-31 Directed. All rights reserved.
Quick Reference Guide
Pit stop/idle mode
1
Stop
the vehicle in a safe parking spot and
put
the
gear in Park (P).
Put
gear in
Park
2
Press
the Remote Start button on the transmitter.*
The parking lights will flash once to indicate the
vehicle is now in Pit Stop Mode.
Parking lights flash x1
14:36
Press Remote
Start button*
&
3
It is safe to
leave
the engine running and
exit
the
vehicle with the factory remote in hand.
Note
: We recommend that you always
lock
the
doors of your vehicle when leaving it unattended.
14:36
Exit vehicle
with remote
* Icon and remote appearance may differ depending on the model purchased.
List of available commands
Note that the information below is for many Viper, Clifford, Python, Avital, Automate,
Autostart and AstroStart models. Icons and commands may differ depending on the
model and options purchased. Refer to your authorized installation center for more
specific information.
Button(s)
Actions
Press
&
hold
for 1 second to lock.
Press
&
hold
for 1 second to unlock.
*
Press
&
hold
for 1 second to remote start.
*
Press
&
hold
for 5 seconds to activate the trunk release (optional).
* Icon and remote appearance may differ depending on the model purchased.
Sending commands to your vehicle
Whether you want to remote start the engine, lock/unlock the doors or pop the trunk,
there are 3 possible ways you can send commands to your vehicle, using the:
• Factory remote.
• Aftermarket remote.
• Directed SmartStart application via your smartphone.
If applicable, you can also start the engine remotely by pressing the Lock button 3
times quickly on your factory remote.
Vehicle takeover
1
Close
the vehicle doors, hood and trunk, then
send
the Remote Start command to start the vehicle.*
14:36
Press Remote
Start button*
2
Send
the Unlock command on the factory or
aftermarket remote.*
14:36
Press Unlock on
either remote*
Complete the following steps within 45 seconds or the vehicle will shut down.
3
Enter
the vehicle, while making sure the factory
remote is inside with you.
14:36
Enter vehicle
with remote
4
For Push-To-Start (PTS) vehicles:
Press
the PTS button twice.
For key-type vehicles:
Insert
your key in the ignition barrel, and
turn
it to
the ON position.
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
5
Depress
the brake pedal,
put
the car in gear and
drive
off.
Ready to
drive off
* Icon and remote appearance may differ depending on the model purchased.