Directed 403.NISS4HT 2.36 RSR Скачать руководство пользователя

Страница: 19 / 22

403.NISS4HT 2.36 2016 Nissan Versa (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.

Feature and option list

It is recommended to configure all the features and options listed below using the configuration tool found on the module flashing
page at www.directechs.com. The web offers more options; however, manual configuration of the features is possible using the
information on this page.

* Default option

Feat.

Operation

Flashes / Option

Description

RFTD Output
Type

1. No RF Output* Module is connected to a remote starter using a standard installation.

2. RFTD Output

Module is connected to an XL202 using an RSR or RXT installation (when available).

3. SmartStart

Module is connected to SmartStart using an RSR or RXT installation (when available).

Trunk

1. Trunk*

Will pop the trunk if available.

2. Right Sliding
Door

When available, will operate the right sliding door.

3. Left Sliding
Door

When available, will operate the left sliding door.

Aux1

1. Trunk

Will pop the trunk if available.

2. Right Sliding
Door*

When available, will operate the right sliding door.

3. Left Sliding
Door

When available, will operate the left sliding door.

Aux2

1. Trunk

Will pop the trunk if available.

2. Right Sliding
Door

When available, will operate the right sliding door.

3. Left Sliding
Door*

When available, will operate the left sliding door.

Parking Light
Control On
Data

1. Disabled

The remote starter parking lights wire must be connected in the vehicle.

2. Enabled*

The parking lights will be controlled by CAN wires.

OEM Security
Disarm On
Data

1. Disabled

The vehicle is not equipped with an OEM alarm.

2. Enabled*

This feature must be enabled when the vehicle is equipped with an OEM security
alarm. The alarm original to the vehicle is disarmed using the bypass and Push-to-
Start (PTS) button.

Door Lock
Control On
Data

1. Disabled

The remote starter door lock wires must be connected in the vehicle.

2. Enabled -
Type1 (EU)

Works for most European vehicles.

3. Enabled -
Type2 (US)*

Works for most North American vehicles. (We've noticed that some North American
vehicles need to be set to "Type 1 (EU)" to work properly.)

Содержание 403.NISS4HT 2.36 RSR






















Результаты поиска

Содержание 403.NISS4HT 2.36 RSR

Отзывы:

Похожие инструкции для 403.NISS4HT 2.36 RSR

Бренды по названию

Популярные бренды

Directed 403.NISS4HT 2.36 RSR, Руководство по установке

Результаты поиска

Содержание 403.NISS4HT 2.36 RSR

Отзывы:

Похожие инструкции для 403.NISS4HT 2.36 RSR

Бренды по названию

Популярные бренды