12
403.CHRYSLER6 2.14 2014 Dodge/Ram 3500
©2022 VOXX•DEI LLC. All rights reserved.
Key2GO
This feature is mandatory to control the immobilizer override in this firmware.
Key2GO has been designed and developed to bypass the advanced encryption layers found in modern vehicles. It uses an array of servers
to generate a duplicate of the original key, allowing the installation of a remote starter without having to give up a key.
The advantage is that this feature allows you to use one original key and the server to configure the bypass in the vehicle.
All Key2GO-compatible firmware are clearly indicated in the function list of each vehicle search result page and will also appear on the
flash page. Any first-time user must re-register to gain access to Key2GO, and some additional information will be required to complete the
registration process, such as your Directed account number and store name.
Key2GO is compatible with XKLoader2 and the online web tool, as well as XKLoader3 and the Directechs Mobile application.
Refer to the Module Programming section of this guide for instructions on how to program features using Key2GO.
Connecting the module
Important!
Make all the required connections to the vehicle, as described in this guide, and double check to ensure everything is correct prior
to moving onto programming.
Warning!
To take advantage of advanced features, you must use DirectLink 4.5 (and higher) or the Directechs Mobile application.
Flashing a module using your computer:
1.
Connect
the interface module to your computer using the
XKLoader2
.
2.
Go
to www.directechs.com using Internet Explorer, and
select
the Flash Module button.
3.
Follow
the instructions to
select
your vehicle, installation type, and configure your options.
4. Once you have configured the firmware options,
click
on the FLASH button.
Flashing a module using your smartphone or tablet:
1.
Connect
the interface module to your
XKLoader3
.
2.
Launch
the Directechs Mobile app on your smartphone or tablet.
3.
Select
FLASH YOUR MODULE and
follow
the on screen instructions.
When the flashing operation is successful, you can proceed with the instructions below.
D2D installation
Recommended:
Connect
the 10-pin, 12-pin and 14-pin harnesses to the module, then
connect
the 4-pin D2D harness.
3
rd
(14-pin)
1
st
(10-pin)
4
th
(D2D)
2
nd
(12-pin)
OR
W2W installation
If required:
Connect
the 10-pin and 12-pin harnesses to the module, then
connect
the 14-pin
harness to the module.
3
rd
(14-pin)
1
st
(10-pin)
2
nd
(12-pin)