16
403.CHRYSLER6 2.17 2014 Dodge/Ram 3500
©2022 VOXX•DEI LLC. All rights reserved.
Module programming
1
Ensure vehicle is in a safe location and cannot move forward during programming. For
vehicles equipped with a manual transmission, make sure the gearshift is in the neutral
position.
2
The harnesses must be connected in this exact order:
1. Connect the 14-pin.
2. Connect the 12-pin.
3. Connect the 10-pin.
When the LED turns ON solid red, proceed with the next step.
3
Turn the key to the ON position.
The LED turns ON solid orange for 3 seconds, then shuts OFF.
4
Press 5 times on the programming button.
The LED flashes orange.
5
Turn the key to OFF and remove it from the ignition barrel.
You have successfully completed the module programming sequence.