Directed 403.CHRYSLER3 Скачать руководство пользователя страница 21

21

403.CHRYSLER3 4.32 2012 Dodge/Ram Journey (Smart Key)
©2022 VOXX•DEI LLC.  All rights reserved.

Runtime

The runtime is equivalent to the amount set for the OEM remote starter, which can be 
modified in some vehicles (refer to your vehicle owner’s manual for more information). A 
maximum of 2 remote starts can be performed between ignition cycles.

Runtime Reset

The Runtime Reset feature allows the user to return the runtime to its predefined value. This 
can only performed ONCE per remote start.

List of available commands

Note that the information below is for many Viper

®

, Clifford

®

, Python

®

, Avital

®

, Automate

®

Autostart

®

 and AstroStart

®

 models. Icons and commands may differ depending on the 

model and options purchased. Refer to your authorized installation center for more specific 
information.

Button(s)

Actions
Press

 & 

hold

 for 1 second to lock.

Press

 & 

hold

 for 1 second to unlock.

 

 

*

Press

 & 

hold

 for 1 second to remote start.

 

  *

Press

 & 

hold

 for 5 seconds to activate the trunk release (optional).

* Icon and remote appearance may differ depending on the model purchased.

SmartStart compatible

This system is compatible with Directed SmartStart. For a complete 

list of supported features, please visit www.mysmartstart.com.

What is SmartStart?

Now you can remote start, lock and unlock your car just by pushing a button on your 
mobile device; using the SmartStart App from Directed, the leader in vehicle security and 
remote start. The simple graphical interface gives you control over the following features of 
your installed remote start or security with remote start system: 

 

Š

Lock/Arm

 

Š

Unlock/Disarm

 

Š

Remote Car Starter

 

Š

Trunk Release

 

Š

Panic

 

Š

AUX Channels

You can also control multiple vehicles – great for families – and assign more than 
one user to control a vehicle. It’s easy with Directed SmartStart

®

! But, this is only the 

beginning! Directed SmartStart

®

 is loaded with additional features including GPS tracking, 

SmartSchedule, vehicle status, roadside assistance, parked car finder and more.

The application enables a “Cloud-Connected Car” like never before, providing 2-way 
interaction with your vehicle. Connectivity is managed through the Directed Cloud Services 
(DCS) network linking car, app, end user, and the Internet.

For more information, visit www.mysmartstart.com.

Notes

Содержание 403.CHRYSLER3






















Отзывы: