Directed Electronics Viper 106V, Руководство пользователя

Страница: 9 / 12

6 © 2 0 0 4 d i re c t e d e l e c t ro n i c s , i n c .
using your system
Use the procedures below to arm and disarm the immobiliser.
arming
When the vehicle’s ignition is turned Off, the immobiliser will start a 30-
second timer and the LED will flash at a rapid rate. During this period the
immobiliser arming can be canceled by turning the vehicle’s ignition On.
After the 30-second timer expires, the immobiliser is armed (starter,
ignition, and fuel pump are immobilised). The LED flashes once per sec-
ond when in the armed state.
disarming
To disarm the system, insert the touch key into the touch key receptacle
and hold until the LED illuminates continuously for 1-second. Remove the
touch key the LED will extinguish. The system is now disarmed.
disarming without a touch key
This procedure allows you to disarm the system without the touch key
should it be lost, damaged, or disabled. In order to disarm without a
touch key, you must have the vehicle’s ignition key, and have the PIN
code.
1. Turn the ignition On, then Off, 6-times.
2. Turn the ignition On a 7
th
time.