manualshive.com logo in svg

Directed Electronics PYTHON 872, Руководство по установке, Страница: 19 / 23

Поделиться
Скачать
Directed Electronics PYTHON 872 Скачать руководство пользователя страница 19

19

© 2009 Directed Electronics. All rights reserved.

Zone 4 Sensor Type: sets the Zone 4 (Sensor 2) name to be displayed in the Text Field for Warn-away 

1. 

and Full Trigger activations

Siren Duration: sets the Full Trigger output duration in 1 second intervals up to 180 seconds.

2. 

Aux/Trunk Icon Type: sets the Accessory animation to be displayed on the screen when the Aux/Trunk 

3. 

output is activated/de-activated

Aux 1 Timed Output: sets the output duration in 1 second intervals up to 90 seconds for Aux 1

4. 

Aux 1 Icon Type: sets the Accessory animation to be displayed on the screen when the Aux 1 output is 

5. 

activated/de-activated

Aux 2 Timed Output: sets the Aux 2 “Timed” output in 1 second intervals up to 90 seconds

6. 

Aux 2 Icon Type: sets the Accessory animation to be displayed on the screen when the Aux 2 output is 

7. 

activated/de-activated

Aux 3 Timed Output: sets the Aux 3 “Timed” output in 1 second intervals up to 90 seconds

8. 

Aux 3 Icon Type: sets the Accessory animation to be displayed on the screen when the Aux 3 output is 

9. 

activated/de-activated

Aux 4 Timed Output: sets the Aux 4 “Timed” output in 1 second intervals up to 90 seconds

10. 

Diesel Start Delay Timer: sets the delay before engine crank in 1 second intervals up to 90 seconds for 

11. 

diesel engine vehicles

Timer Mode Runtime: sets the duration of runtime when the engine is started by the Timer Mode and Smart 

12. 

Start features

Timer mode Starts: sets the number of times the engine will be started by the Timer Mode and Smart Start 

13. 

features

Timer mode Intervals: sets the number of hours between engine starts by the Timer Mode and Smart Start 

14. 

features

Smart  Start  Low  Temperature:  sets  the  low  temperature  threshold  required  for  Smart  Start  to  start  the 

15. 

engine

Smart Start High Temperature: sets the high temperature threshold required for Smart Start to start the 

16. 

engine

Smart Start Low battery (Volts): sets the low battery level threshold required for Smart Start to start the 

17. 

engine

Sensor 1 level: directly sets the sensor level of the on-board shock sensor

18. 

Starter Release Fine Tune: adds or subtracts crank time in Tachometer mode in order to overcome engine 

19. 

types that short crank or over-crank on the first start attempt

Feature  Programming:  locks  and  unlocks  the  user’s  ability  to  enter  the  feature  menus  and  manually 

20. 

change the main unit programming using the Control Center

Transmitter Programming: locks and unlocks the user’s ability to enter the remote control/Reset menu and 

21. 

manually change any functions using the Control Center

Remote Start Runtime: sets the duration of runtime when the engine is started by remote command

22. 

VirtualTach Fine tune: adds or subtracts crank time in VirtualTach mode in order to overcome engine types 

23. 

that short crank or over-crank on the first start attempt

Содержание PYTHON 872
























Отзывы:

Нет отзывов