P. 10
User Guide
(13)
If there is no activity within the programmed time, the keypad will automatically lock
after 5 seconds, 10 seconds or 20 seconds.
•
Press
for about 1sec
,
to unlock the transmitter’s keypad.
ILLUM
(14)
LCD illumination:
When this function is enabled, the LCD will illuminate each time Lock, Unlock or
START is activated.
FBPRO
(15)
Button Function:
The order of LEVELS and MENU can be re-arranged using the
Button Function
Menu.
F Button Function
Menu
FBPRO
Function Button Programming
Function Button
programming
M 1 2 3
1 2 3 M
2 3 1 M
2 1 3 M
3 1 2 M
MENU, level 1, level 2, level 3
Level 1, level 2, level 3, MENU
Level 2, level 3, level 1, MENU
Level 2, level 1, level 3, MENU
Level 3, level 1, level 2, MENU
Remote
Starting
Your
Vehicle
Setting
Your
Vehicle
Into
Ready
Mode
If your vehicle has a manual transmission you must read the following indications. The unit must
first be set to Ready Mode in order to start the vehicle by remote. If the unit is not set to Ready
Mode, it cannot remote start the vehicle.
Please note that Ready Mode can be enabled by the remote or the handbrake, depending on the
option that was selected by your installer. Therefore, you must follow the appropriate procedure
between the two described below in order to set your vehicle into Ready Mode.
Once the system is set to Ready Mode, the vehicle can be remote started and stopped at any time.
The system will exit Ready Mode if a door, the hood or the trunk is opened, if the brake pedal is
pressed, if the parking brake is disengaged or if the ignition key is turned to the IGNITION ON
(RUN) position.
To set the system to Ready Mode:
If Ready Mode is enabled by remote
If Ready Mode is enabled by handbrake
1.
Ensure that all the doors, hood and trunk are closed. Make sure that the gear selector is in the
neutral position.
2.
With the engine already running, apply the
parking brake once and release the brake
pedal.
2.
With the engine already running, apply the
parking brake twice within 10sec.
Make sure to release the brake pedal.
The parking lights will flash 3 times quickly
and remain lit.
Skip to step 4.
3.
Within 20 sec. of engaging the parking
brake, press and hold
,
or on
the transmitter.
4.
The parking lights will flash 3 times quickly
and remain lit.
-
5.
Remove the key: the engine will continue running.
6.
Exit the vehicle and close all doors, hood and trunk.
7.
Press for approx. 1 second either:
