19
QUICK REFERENCE OPERATING CARD:
Arming
▼
You can turn on, or arm, the system by pressing Button I of your
transmitter for one second. When the system arms, you will hear a
short chirp, and see the parking lights flash once.
Arming While Driving
▼
Press Button I on your transmitter while the vehicle is running. The
system will chirp once and then once more to indicate that the igni-
tion is on.
Disarming
▼
Press Button I. You will hear two chirps, and the parking lights will
flash twice.
High Security Disarm
▼
Press Button I on your transmitter. The siren will stop sounding. Next
press Button I once more and the system will chirp four or five times
(reporting the trigger) and disarm.
Disarming Without a Transmitter
▼
Turn on the ignition. Push the Valet switch within 15 seconds. The
system should now disarm. If it does not, you may have waited too
long, so turn the ignition off and on and try again.
Silent Mode
TM
▼
Press Button II briefly before arming or disarming, and the confirma-
tion chirp(s) will be eliminated for that one operation only.
Panic Mode
▼
Press Button I for 1.5 seconds, and you will enter Panic Mode. The
siren will sound and the parking lights will flash for 30 seconds. To
stop Panic Mode at any time, press Button I on the transmitter
again.
Arming the VRS
®
▼
Push the VRS
®
. Once the system is armed, it will go into its triggered
sequence once any door is opened and closed or you are forced
from the vehicle.
Using Remote Valet as you enter or exit the vehicle:
▼
Press Button I. Press Button II. Press Button I again. The Status LED
will light steady if you have entered Valet Mode,and go out if when
you exited.
Cut along dotted line and f
old where indicated f
o
r a quic
k and easy ref
erence to keep in y
our pur
se or wallet.
✂✂
