17
© 2009 Directed Electronics. All rights reserved.
6. Turbo Mode
No turbo Mode: Turbo mode is not available
1.
On – 1/3/5/10 minutes: Turbo Mode is available and, when activated, the engine will run for the
2.
duration set per the selected option
7. Timer Mode Runtime
12/3/6/9 minutes: sets the runtime when the engine is started by the Timer Mode and SmartStart
•
features
8. Flex Relay Function
Ignition 2: the relay will emulate the Ignition 1 output during remote start
1.
Accessory 2: the relay will emulate the Accessory 1 output during remote start
2.
Starter 2: the relay will emulate the Starter output during remote start
3.
9. Diesel Start Delay
Wait-to-start input: (-) input on the Grey/black (H2/7) WTS wire will delay the starter output until the
1.
ground ceases.
Timed 15/30/45 seconds: delays the starter output per the selected option, the WTS wire does not
2.
function.
10. Accessory during Diesel Start Delay
On: the Accessory outputs (H/3 high current and H2/12 low current) will be ON during diesel start
1.
delay
Off: the Accessory outputs (H/3 high current and H2/12 low current) will be OFF during diesel start
2.
delay
11. Status 2 Output (Dark Blue H2/10 wire)
Status: the output will activate before the ignition outputs turn on, and de-activate after they turn off
1.
during remote start
Latch rear defogger: the output activates 10 seconds after start if the interior temperature is below
2.
55F. It turns off after 10 minutes or upon remote start off
Pulse rear defogger: the output activates (for 800mS) 10 seconds after start if the interior temperature
3.
is below 55F.
12. Parking Light Output
Constant: the lights will turn on solid during remote start
1.
Pulsed: the lights will pulse on/off during remote start
2.
Off: the lights will be off during remote start
3.
13. Anti-grind Output
On: the high current starter relay will be activated during remote start as anti-grind protection.
1.
Off: the high current starter relay will not be activated during remote start, no anti-grind protection
2.
is available.
14. Tach Mode Starter Release
Normal: the starter output will release normally during cranking (50% of the learned tachometer
1.
value)
Increase: the starter output will release later during cranking (at 35% of the learned tachometer
2.
value)
Decrease: the starter output will release sooner during cranking (at 35% of the learned tachometer
3.
value)
15. Vehicle Temp Auto Report
Off: the report during remote start is defeated
1.
On: the report is sent every 2 minutes during remote start if the temperature has changed (+/-) 1
2.
degree since the last report
16. Remote start Safelock
Off: the Door lock and Factory Alarm Re-arm outputs will maintain the current status (locked/un-
1.
