➤
Continued pressing of
will begin the Multi-Level
Security Arming cycle over again.
disarming
Press
to disarm the system. The vehicle’s lights will flash
twice, the doors will unlock, the siren will chirp twice and the
status LED will turn off. The transceiver will beep twice (or
vibrate), and the disarm icon (29) will be displayed on the LCD.
If the siren chirps and the transceiver beeps four or five times
when disarming, the system is reporting a triggered response or
NPC was activated while armed. Refer to the
Diagnostic
section
of this manual for information about disarm diagnostics and how
to interpret them.
note:
If the transceiver received a Warn Away
®
or
Triggered Response Page while armed, the first press of the
unlock button will clear the page alert. A second press will
turn the siren off, and a third press will disarm the system.
➜
note:
Multi-Level Security Arming only applies to a sin-
gle arming cycle. Once the system is disarmed and then
re-armed, all the zones will be active again.
25
© 2 0 0 3 d i r e c t e d e l e c t r o n i c s , i n c .
