background image

i

© 2007 Directed Electronics - all rights reserved

Limited consumer warranty

For a period of one calendar year from the date of purchase of this auto-security
device, Directed Electronics, (Directed) promises to the ORIGINAL PURCHASER to
repair or replace (at Directed's election) with a comparable reconditioned model, any
Directed unit (hereafter the "unit"), excluding without limitation the siren, the
remote transmitters, the associated sensors and accessories which proves to be
defective in workmanship or material under reasonable use, provided the following
conditions (herein "Conditions") are met: the unit was purchased from an authorized
Directed dealer; the unit was professionally installed and serviced by an authorized
Directed dealer; the unit will be professionally reinstalled in the vehicle in which it
was originally installed by an authorized Directed dealer; and the unit is returned to
Directed, shipping prepaid with a legible copy of the bill of sale or other dated proof
of purchase bearing the following information: consumer's name, telephone number
and address; the authorized dealer's name, telephone number and address; complete
product description, including accessories; the year, make and model of the vehicle;
vehicle license number and vehicle identification number. ALL UNITS RECEIVED BY
DIRECTED FOR WARRANTY REPAIR WITHOUT PROOF OF PURCHASE WILL BE DENIED.

After the first calendar year, from the date of purchase of the unit, Directed, promises
to the ORIGINAL PURCHASER to repair or replace, (at Directed's sole and absolute
discretion) with a comparable reconditioned model any unit which proves to be
defective in workmanship or material under reasonable use FOR A CHARGE OF $45.00,
SO LONG AS THE AFOREMENTIONED CONDITIONS HAVE BEEN MET. The unit must be
returned to Directed, postage pre-paid, along with a legible copy of the receipt
(including the information below) and a cashier's check or money order made payable
to Directed Electronics in the amount of $45.00. 

This warranty is non-transferable and is automatically void if the unit has been
modified or used in a manner contrary to its intended purpose, or if the unit has been
damaged by accident, unreasonable use, neglect, improper service or other causes not
arising out of defects in materials or construction. This warranty does not cover
damage to the unit caused by installation or removal of the unit. This warranty does
not cover labor costs for the removal, diagnosis, troubleshooting or reinstallation of
the unit. For service on an out-of-warranty product a flat rate fee by model is
charged. Contact your authorized dealer to obtain the service charge for your unit.

These security systems are a deterrent against possible theft. Directed is not offering
a guarantee or insuring against vandalism, damage or theft of the automobile or its
parts or contents and Directed hereby disclaims any liability whatsoever, including
without limitation, liability for damage, vandalism and/or theft of the vehicle, parts
and/or its contents. Directed neither assumes nor authorizes any person or entity to
assume for it any duty, obligation or liability in connection with its products.
Directed disclaims and has absolutely no liability for any and all acts of third parties,
including its authorized dealers or installers. In the event of a claim or a dispute
involving Directed or its subsidiary, the venue shall be in San Diego, California.

Содержание 3901T






















Отзывы: