Directed Audio CSX650 Скачать руководство пользователя страница 3

33

© 2004 Directed Electronics, Inc 

LIMITED TWO-YEAR CONSUMER WARRANTY

Directed Electronics, Inc. promises to the orig-
inal purchaser, to replace this product should
it prove to be defective in workmanship or
material under normal use, for a period of two
years from the date of purchase from the
dealer as indicated by the date code marking
of the product PROVIDED the product was
installed by an authorized Directed dealer.
During this two-year period, there will be no
charge for this replacement PROVIDED the unit
is returned to DIRECTED ELECTRONICS, INC.,
shipping pre-paid. If the unit is installed by
anyone other than an authorized Directed
dealer, the warranty period will be one year
from the date of purchase by the dealer as
indicated by the date code marking of the
product. This warranty is non-transferable and
does not apply to any unit that has been
modified or used in a manner contrary to its
intended purpose, and does not cover damage
to the unit caused by installation or removal
of the unit.  During this one-year period, there
will be no charge for this replacement
PROVIDED the unit is returned to DIRECTED
ELECTRONICS, INC., shipping pre-paid. This
warranty is void if the product has been
damaged by accident or unreasonable use,
neglect, improper service or other causes not
arising out of defects in materials or construc-
tion.  Units which are found to be damaged by
abuse resulting in thermally damaged voice
coils are not covered by this warranty but may
be replaced at the absolute/sole discretion of
DIRECTED ELECTRONICS, INC. ALL
WARRANTIES INCLUDING BUT NOT LIMITED
TO EXPRESS WARRANTY, IMPLIED WARRANTY,
WARRANTY OF MERCHANTABILITY, FITNESS

FOR PARTICULAR PURPOSE, AND WARRANTY
OF NON-INFRINGEMENT OF INTELLECTUAL
PROPERTY ARE EXPRESSLY EXCLUDED TO THE
MAXIMUM EXTENT ALLOWED BY LAW, AND
DIRECTED ELECTRONICS, INC. NEITHER
ASSUMES NOR AUTHORIZES ANY PERSON TO
ASSUME FOR IT ANY LIABILITY IN CONNEC-
TION WITH THE SALE OF THE PRODUCT.
DIRECTED ELECTRONICS, INC. HAS
ABSOLUTELY NO LIABILITY FOR ANY AND ALL
ACTS OF THIRD PARTIES INCLUDING ITS
AUTHORIZED DEALERS OR INSTALLERS. Unit
must be returned to DIRECTED ELECTRONICS,
INC., postage pre-paid, with bill of sale or
other dated proof of purchase bearing the
following information: consumer's name, tele-
phone number, and address, authorized
dealer's name and address, and product
description.  Note: This warranty does not
cover labor costs for the removal and reinstal-
lation of the unit. IN ORDER FOR THIS
WARRANTY TO BE VALID, YOUR UNIT MUST
BE SHIPPED WITH PROOF OF INSTALLATION
BY AN AUTHORIZED DIRECTED ELECTRONICS,
INC. DEALER.  ALL UNITS RECEIVED BY
DIRECTED ELECTRONICS, INC. FOR WARRANTY
REPAIR WITHOUT PROOF OF DIRECTED ELEC-
TRONICS, INC.  DEALER INSTALLATION WILL
BE COVERED BY THE LIMITED 1 YEAR PARTS
AND LABOR WARRANTY. Note: This warranty
does not cover labor costs for the removal and
reinstallation of the unit. BY PURCHASING
THIS PRODUCT, THE CONSUMER AGREES AND
CONSENTS THAT ALL DISPUTES BETWEEN THE
CONSUMER AND Directed SHALL BE
RESOLVED IN ACCORDANCE WITH CALIFORNIA
LAWS IN SAN DIEGO COUNTY, CALIFORNIA.

Содержание CSX650












Отзывы: