Type 4
without
OEM alarm
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of special notes referenced in the diagram (
).
11: Orange/Yellow:Immobilizer
Data Interrupt (vehicle side)
6: Yellow: Immobilizer Data Interrupt
(connector side)
HS CAN Low: Tan: 4
HS CAN High: Tan/Black: 5
10: Red: (+) 12V Input
(-) Trunk Release Output: Red/White: 9
9: Black: (-) Ground
Immobilizer Data Interrupt
(vehicle side): Orange/Black: 3
Immobilizer Data Interrupt
(connector side): Yellow/Black: 2
The Remote Start
Safety Override
Switch MUST be in
the ON position.
Remote Start Safety
Override Switch
(-) Unlock Output: Dark Blue: 7
(-) Lock Output: Dark Green: 15
Siren
Hood Pin
Refer to the Vehicle
wiring reference chart.
(-) Hood Input: Gray: 3
(+) Siren Output: Brown: 17
(-) RAP Off Output: White/Violet: 11
(-) Parking Light Output: Green/Black: 10
7 White
4 White
8 thick-gauge wir
es
MC501
16
8
9
1
C-CAN High: pin 6
C-CAN Low: pin 14
OBDII Diagnostic
(connector side view)
OR
2 - EM11, Blue 39-pin conn.
10
1 - MC12, Gray 39-pin conn.
15
Connector
Cut
Ignition Switch
(white 6-pin connector)
(+) Ignition Output: Pink
(+) Starter:
White,
pin 1
(+) Accessory Output: Orange
(+) 12V Input: Red
(+) 12V Input: Red
(+) Starter Output (to starter): Violet
(+) 12V Input: Red/White
(+) Accessory 2 Output:
Pink/White
Starter Input (from key switch): Green
(+) Accessory Interrupt
(connector side)
(+) Accessory Interrupt
(vehicle side)
86
85
87a
87
30
(+) Accessory:
Orange, pin 3
(+) Accessory 2:
Yellow, pin 4
(+) 12V: Black,pin 5
15A fuse
(+) Ignition:
Blue, pin 6
The EMS COM connections are only needed
if the vehicle has a transponder/immobilizer.
Refer to the Vehicle wiring reference chart for
the connector, pin and wire color for your specific vehicle.
C-CAN wires MUST be connected for
proper operation.
Note: For the 2012-2013 Kia Soul,
HS CAN High and Low may be reversed.
17
Directed Digital Solutions HKHT1
© 2020-03-03 Directed. All rights reserved.
