4
The high-performance DirectConnect® Professional Series Racks have many benefits
and features that enable it to perform in a superior manner. Among those benefits and
features you will find:
Quick and easy to assemble design allows for flat shipment
Adjustable numbered (EIA standards) mounting rails to fit virtually any piece of
19” equipment
Robust locking (2) six screw heavy duty caster system
Four adjustable (one in each of the four (4) corners of the base) heavy duty lock-
ing feet
Removable Cable Knockouts on rack’s top and bottom
Heavy-gauge steel tops and bottoms, seamless steel sides, and rails
Load capacity 29U–up to 650 lbs (295Kg) / 38U–up to 700 lbs (318Kg) / 42U–up to
780 lbs (354Kg)
Locking, removable, and reversible custom designed vented tempered glass front
door
Locking, removable, and reversible fully vented rear door
Heavy duty and durable black textured powder coat finish
Cable channel molding option between rails and doors for 2” x 2” PVC” cable
management
19” equipment width rail size (EIA standard labeling) for the 29U, 38U, and 42U
racks
29U
Rack Dimensions: (H x W x D) 57.5” x 23.75” x 23.75” (1,460.5 x 603.3 x
603.3mm)
38U
Rack Dimensions: (H x W x D) 73.25” x 23.75” x 23.75” (1,860.5 x 603.3 x
603.3mm)
42U
Rack Dimensions: (H x W x D) 73.25” x 23.75” x 23.75” (2,057.4 x 603.3 x
3.0 PACKAGE CONTENTS
Before attempting to use these DirectConnect® Professional Series Racks, please check
the packaging and make sure the following items are contained in the shipping carton:
(Total of 3 cartons)
Front, back, and two (2) side assemblies
Top and bottom assembly
Two (2) left and two (2) right sides with mounting rails
Adjustable locking feet – four (4)
Four (4) locking casters
DirectConnect® User's Manual
Keys –two (2) sets of two (2)
Hardware pack
2.0 FEATURES
5
4.0 INSTALLATION GUIDE
We are not responsible for any personal injury or product damage due to mishan-
dling, incorrect mounting, incorrect assembly, or incorrect use of this product.
CAUTION:
DirectConnect® Professional Series Racks are intended only with the maxi-
mum weights indicated. See apparatus instructions. Use with products heavier than
the maximum weights indicated may result in instability, causing possible injury.
Step 1
:
Unpacking Carton 2 of 3, removing transit parts, and side assemblies
(Two (2) Side Assemblies, (with mounting rails attached)
Remove the small mini shipping screws (2) opposite of side door releases on both the
left and right side of side rack assembly (3) to remove side panels to start rack assem-
bly.
Step 2:
Unpacking Carton 1 of 3 and assembly Front & Rear Assembly to sides.
Using eight (8) M5x10 screws
(C)
attach the Front Assembly
(1)
as unpacked from
carton 1 of 3 and attach to the Left
(A)
and Right
(B)
assemblies as shown in Fig-
ure 2. (Casters are already attached)
Installing the Back Assembly (2) to Left (3), Right (3), &
Front (1)
Assemblies
Using eight (8) M5x10 screws
(C)
attach the Back Assembly
(2)
as unpacked from
carton 1 of 3 and attach to the left and right assemblies
(3)
as shown in Figure 3.
(Casters are already attached)
Fig. 2
Fig. 3
