4
M A N U A L
EN - Please read the instructions before you start using this product
Intended use
This instruction applies to shower stool with soft and solid seats.
The shower stool is mostly used in the bathroom.
The shower stool is equipped with lateral armrests.
The soft seat is made of polyurethane; a soft material with good non-slip properties. The solid seat is made of ABS
plastic. The shape of the solid seat also prevents slippage.
Assembly – see drawing
The loose legs are mounted in the frame and secured with the snaplock clips. Make sure the clips are properly inserted
in the leg holes. The seat is pressed onto the seat frame, with the 4 teats securely inserted in the 4 holes.
Check the correct position of the seat before use.
Adjustment – see drawing
The shower stool is height adjustable in 8 steps. The adjustment takes place by detaching the snaplocks from the legs
one by one and selecting the desired height.
Be sure to adjust the four legs to the same height and to insert the snaplocks firmly into the tubes again. The rear legs
can be height adjusted to slope the seat forwards, however not more than 2 holes difference.
Maintenance
To be wiped clean after use. Clean the stool with domestic cleaning materials without abrasive or corrosive properties.
Solvents and chlorine should not be applied.
The polyurethane seat can be detached for cleaning. Polyurethane can tolerate temperatures up to 85 ºC/3 minutes. Be
sure to reattach the seat correctly.
Warning
•
Max. load: 150 kg.
•
For optimal safety, shower stools without a mounted backrest should be placed against a wall.
•
Only use the shower stool as described in the paragraph “Purpose”.
•
Do not stand on the shower stool.
•
Do not push or pull the shower stool across the floor while sitting on it!
•
Check the correct position of the snaplocks before using the stool.
•
Check the condition of the snaplocks frequently. Regularly check that the snaplocks are
inserted correctly into the tubing.
•
For optimal safety it is recommended to check the ferrules frequently and to replace them
whenever necessary.
•
Height adjustment of the rear legs should be max. 2 holes difference to the front legs.
Accessory
Backrest no: 200180312/ LI2002.0014-02
Содержание Linido 200500312
Страница 11: ...11 M A N U A L...
