Page 4
Encora Gas Action Model only
Back Angle Adjustment
The angle of the back is adjustable in relation
to the seat in order to ensure comfort and
facilitate correct positioning.
To alter the angle, squeeze the “brake-style”
handle on the right hand side of the push
handle at the back of the chair. This activates
the positioning mechanism and enables the
back to recline.
Release the lever when the desired angle is
achieved.
To bring the chair back to an upright position,
squeeze the “brake-style” handle on the right
hand side of the push handle at the back of
the chair and guide the chair to the desired
position.
Maintenance of the cable
Regularly check the cables to ensure they are
not trapped or catching on any framework
causing them to kink and stop the chair from
working properly.
Encora Gas Action Model only
Operating the Tilt-in-Space and
Elevating Legrest
The Encora Gas Action enables the carer to
manually adjust the Tilt-in-Space facility and/or
the elevating legrest.
•
To tilt the chair backwards, squeeze the
“brake-style” handle on the left hand side
of the push handle at the back of the
chair. This activates the positioning
mechanism and enables the chair to tilt-
in-space. Release the lever when the
desired position is achieved.
•
To tilt the chair forwards, squeeze the
“brake-style” handle on the left hand side
of the push handle at the back of the
chair and guide the chair to the desired
position.
•
To elevate the legrest, locate the lever on
the right hand side of the armrest, and lift.
While doing so, gently guide the legrest
into an elevated position. Release the
lever when the desired position is
achieved.
•
To retract the legrest, pull the same lever
and push the legrest downwards.
•
Always ensure the legrest is fully
retracted before exiting the chair.
Gas Action only
