diono.com
radian 3QXT
36
37
REAR
–
FA
CING
REAR
–
FA
CING
INSTALL USING LATCH/UAS:
4–35 lb (1.8–15.8 kg)
DO NOT
install by this method for a child weighing
more than 35 lb (15.8 kg).
Reinstall with vehicle belt
for weights between 35–50 lb (15.8–22.7 kg).
1. Remove LATCH/UAS strap
from storage location
1
on
back of seat
. Use LATCH/
UAS release on LATCH/UAS
connectors and pull up to
remove. Unhook strap from
back of seat shell.
2. Extend the LATCH/UAS strap.
For easier installation, extend
the LATCH/UAS strap to its
maximum length by pressing
the grey button and pulling on
the strap.
LATCH Connectors
1
1
3
2
3. Place car seat rear-facing in
back seat of the vehicle with
detachable rear-facing base
installed (page 33).
Center the
car seat between the vehicle
LATCH/UAS anchors. The entire
seat bottom should sit flat on
the vehicle seat.
4. Slide the LATCH/UAS strap
through the rear-facing belt
path and out the other side.
The LATCH/UAS strap should
lie flat and not be twisted.
5. Attach LATCH/UAS connectors
to vehicle LATCH/UAS anchors
and listen for audible "click" to
confirm engagement.
3
4
5