ca.diono.com/welcome
1-866-954-9786
46
47
10. Tighten the Top Tether Strap
Push the car seat back while
tightening the tether strap to
remove all the slack.
11. Test for Tightness
Grab the side of the seat with one
hand where the UAS strap is and
slide the car seat side-to-side and
front-to-back. If the seat moves
less than 2.5 cm (1"), it is tight
enough. Do not test by grasping
top of the seat.
12. To Remove UAS Strap From
Vehicle
Push in on the red buttons on the
UAS connects and pull them off
the anchor bars.
FOR
W
ARD F
A
CING
7. Locate the UAS Strap in the
Forward-Facing Belt Path.
Thread UAS strap through the
forward-facing belt path (marked
with the red label) and out the
other side. The UAS anchors are
easier to feed through by pulling
forward on the front cover as
shown.
8. Attach UAS Connectors to
Vehicle’s Lower Anchors and
listen for audible click to confirm
engagement.
UAS strap should lie flat and not be
twisted.
9. Tighten the UAS Strap
Press down firmly in the centre of
the car seat while tightening the
UAS strap. You may need to tighten
through the opening in the pad at
the belt path as shown, by pulling it
through and up.
FOR
W
ARD F
A
CING