Dionex UltiMate 3000 Series, Руководство по эксплуатации

Страница: 54 / 236

UltiMate 3000 Series:
SD, RS, and BM Pumps
Page 40 Operating Instructions
Solvents Page or Left Solvents and Right Solvents Pages (depending on the pump type)
Check and change the number of solvents delivered by the pump and the solvent names if
necessary.

Number of Solvents
Indicate how many solvents are delivered by the pump. The pump type determines how
many solvents can be delivered.
Pump Type Max. Number of Solvents
ISO-3100 1
HPG-3200 2
LPG-3400, HPG-3400 4
DGP-3600 2 x 3

Solvent Names
Enter a name for each connected solvent. A solvent name can contain a maximum of 30
characters. The names of the solvents appear, for example, in the gradient display of the
online control panel and in the report.
Bottles page (only DGP-3600)
Check and change if necessary the settings for monitoring the solvent consumption and liquid
level in the waste container:

Share Eluent Bottles
The check box is selected by default. Accept this setting if both pumps of the DGP-3600
are connected to the same solvent reservoirs.
If the check box is selected, Chromeleon assigns the eluent properties,
%A/B/C_RemainTime and % A/B/C_WarningLimit , the same values for each pump.
(The eluent properties are available, for example, in the Commands dialog box under
PumpModule > [Pump Device Name] (

page 37).)
Clear the check box if the pumps are connected to different solvent reservoirs. With this
setting, Chromeleon supports the two eluent properties separately for each pump.