4 OF 3
®
Toll Free: 877.817.6028 | Fax: 415.592.1596 | www.DiodeLED.com | [email protected]
© 2018 Elemental LED, Inc. All rights reserved. Specifications are subject to change without notice.
IG061518-2.0
CHROMAPATH
®
BUNDLE: REFLECTOR
INSTALLATION GUIDE
CHROMAPATH
®
BUNDLE: REFLECTOR
ALUMINUM CHANNEL
INSTALLATION GUIDE
Attach end caps. Adhere with adhesive or glue if desired.
MOUNT CHROMAPATH FIXTURE
INSTALLATION (CONT.)
Open end cap
Closed end cap
5
To bridge between two channels, lay channels
end-to-end, then place cover over gap to keep ends
flush.
4.3
4.4
6
Apply adhesive to top and bottom of channel behind
flanges.
CUT AREA FOR CHANNEL MOUNTING
Unless channel length has been modified, cut 48.5” x
2.5” rectangle from surface.
48.5”
2.5”
Note: When cutting into surface for mounting, leave space
for wiring to connect LED’s to power source. Always observe
local and national electrical code during installation.
Insert channel into mounting space. Allow adhesive to
dry.
6.1
6.2
