DiO UV Activator Скачать руководство пользователя страница 11

memo

 

FCC Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions:

(1)This device may not cause harmful interference.

(2)This device must accept any interference received, including interference that may

cause undesired operation.

2.Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Note:This equipment has been tested and found to comply with the limits for a class B

digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to

provide

 

reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequenc

y

 energy and,if not

installed and used in accordance with the instructions,may cause harmful interference

to radio 

communications. However

,there is no guarantee that interference will not

accordance

 in a particular 

installation.

 this 

equipment

 does cause harmful interference

to radio or television reception,which can be determined by turning the equipment off

and on,the user is encouraged to try to correct the interference by one or more of the

following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an autlet on a circuit different from that to which the

receiver is 

connected

.

•Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment

. This equipment should be installed and operated with

minimum distance20cm between the radiator & your body.

•FCC ID:2AT9P-UVACT02

Содержание UV Activator













Отзывы: