Page 3/4
Routing (TP line
RF line)
Group telegrams
Block:
No group telegrams are routed to the RF
line.
Route:
All group telegrams are routed to the RF line
independent of the filter table. This setting is
for test purposes only.
Filter:
The filter table is used to check whether or
not the received group telegram should be
routed to the RF line.
Individual addressed telegrams
Block:
No individually addressed telegrams are
routed to the RF line.
Route:
All individually addressed telegrams are
routed to the RF line. This setting is for test
purposes only.
Filter:
The individual address is used to check
whether the received individually addressed
telegram should be routed to the RF line.
System broadcast telegrams
Block:
No received system broadcast telegrams are
routed to the RF line.
Route:
All received system broadcast telegrams are
routed to the RF line.
Broadcast telegrams
Block:
No received broadcast telegrams are routed
to the RF line.
Route:
All received broadcast telegrams are routed
to the RF line.
Acknowledge (ACK) of group telegrams
Always:
A acknowledge is generated for every re-
ceived group telegram (from the TP line).
Only if routed:
A acknowledge is only generated for re-
ceived group telegrams (from the TP line) if
they are routed to the RF line.
Acknowledge (ACK) of individual telegrams
Always:
A acknowledge is generated for every re-
ceived individual addressed telegram (from
the TP line).
Only if routed:
A acknowledge is only generated for re-
ceived individually addressed group tele-
grams (from the TP line) if they are routed to
the RF line.
Routing (RF line
TP line)
Group telegrams
Block:
No group telegrams are routed to the TP
line.
Route:
All group telegrams are routed to the TP line
independent of the filter table. This setting is
for test purposes only.
Filter:
The filter table is used to check whether or
not the received group telegram should be
routed to the TP line.
Individually addressed telegrams
Block:
No individually addressed telegrams are
routed to the TP line.
Route:
All individually addressed telegrams are
routed to the TP line. This setting is for test
purposes only.
Filter:
The individual address is used to check
whether the received individually addressed
telegram should be routed to the TP line.
System broadcast telegrams
Block:
No received system broadcast telegrams are
routed to the TP line.
Route:
All received system broadcast telegrams are
routed to the TP line.
Broadcast telegrams
Block:
No received broadcast telegrams are routed
to the TP line.
Route:
All received broadcast telegrams are routed
to the TP line.
Management telegrams
Ignore:
The received management telegram from
the RF line will be ignored.
Accept:
The received management telegram from
the RF line will be accepted.
Repetition of group telegrams
Disabled:
The received group telegram is not resent to
the TP line in case of a fault.
Enabled:
The received group telegram is resent up to
three times in case of a fault.
Repetition of individual addressed telegrams
Disabled:
The received individually addressed tele-
gram is not resent to the TP line in case of a
fault.
Enabled:
The received individually addressed tele-
gram is resent up to three times in case of a
fault.