UC8000 IPPBX User Manual
63
switching rules.
III. Switching Rules
The switching rule takes effect only when the active and standby configuration is
enabled. The higher the value, the higher the weight for that network port.
Prerequisites:
A network port detection entry has been created for the network port.
Operation steps:
•
On the Profile/Active and Standby/Switching Rules Detection interface, new
switching rules.
•
Configure different weight for different network interfaces, with optional weight: 1-
10.
•
After configuring the network port detection and switching rules on both the
active and the standby, save the application.
Instructions for using the network port detection and switching rules.
Under normal circumstances, the difference between the total weight of all network
ports of the active and the total weight of all network ports of the standby is less than
10; When the active is dropped, then its weight is 0; Once the total weight of the
active value is less than or equal to the total weight of the standby -10, then the
active/standby switchover is triggered, and the standby machine with a stable
network port is switched to active.
IV. Services that support active and standby switching
Simultaneous connected
calls only
Call switching for the current call page connected
works properly.
Configuration file
Call-related configuration files, active and standby
