On the "Call Control → Route" interface, you can configure routes for incoming calls
and outgoing calls.
Configure Outbound / Inbound Rule
11
Basic Operation
12
Dial *158# to query the IP address of GE0 port of the device;
Dial *114# to query the telephone number of a FXS port;
Dial *111# to restart the device;
Click "system->Reboot" menu to perform reboot.
Note: Dialing *158# to query the IP address of GE0 port of the device is only
available for FXO/FXS user boards.If your user board is E1/T1 boards, it has to
query the IP address from CONSOLE.
The UC350 supports max 300 routes, the rule with a lower index has a higher
priority.
The key configuration of route is at “condition” part. Here, you can configure the
route based on the Caller/Called Number prefix and time.