Error! Use the Home tab to apply
标题
1 to the text that you want to appear
here.Error! Use the Home tab to apply
标题
1 to the text that you want to
appear here.
UC100-1T1S1O User Manual
Copyright©2011-2016 Dinstar
36
Static IP Address:
Static IP address is a semi-permanent IP address and remains associated with a single
computer over an extended period of time. This differs from a dynamic IP address
,
which is
assigned
ad hoc
at the start of each session, normally changing from one session to the next.
If you choose static IP address, you need to fill in the following information:
IP Address: the IP address of the WAN port of the UC100-1T1S1O;
Netmask: the netmask of the router connected the UC100-1T1S1O;
Default Gateway: the IP address of the router connected the UC100-1T1S1O;
Use custom DNS server: the IP address of the DNS server
Figure 5-26 Set WAN IP as Static Address
PPPoE:
PPPoE is an acronym for point-to-point protocol over Ethernet, which relies on two widely
accepted standards: PPP and Ethernet. PPPoE is a specification for connecting the users on an
Ethernet to the Internet through a common broadband medium, such as a single DSL line,
wireless device or cable modem. PPPOE IP address refers to IP address assigned through the
PPPoE mode.
If you choose PPPoE, you need to fill in to fill in the following information:
Username: the account name of PPPoE
Password: the password of PPPoE
Server Name: the name of the server where PPPoE is placed