MTG200 User Manual
25
Dinstar Technologies Co., Ltd.
Table 2-9-1 Description of Management Parameter
WEB Port
Listening port of local WEB service, the default is 80.
Telnet Port
Listening port of local Telnet service, the default is 23.
Syslog Enable
The default is “No”. If select “Yes”, users will set syslog server address and syslog level.
Server Address
Address for saving system log
Syslog Level
None, Debug, Notice, Warning, Error. Please choose the file you want to output
information level.
Send CDR
Whether send Call Detail Record through syslog
Qos Type
There are three options: none, TOS and DS. TOS only supports IPv4.
NTP Enable
Simple Network Management Protocol is enabled or not; the default is Yes.
Primary NTP server
Address
The Primary IP address of SNMP management host computer. The host computer of
the IP address will carry out monitoring and management to equipment.
Primary NTP server
Port
The port that managed device provides trap message (it is generally alarm message) to
SNMP management host computer, the default is 123.
Secondary NTP server
Address
The Secondary IP address of SNMP
Secondary NTP server
Port
The port of the Secondary IP address of SNMP
Sync Interval
Time interval of check
Time Zone
The time zone of local
2.9.2 Data Restore
Figure 2-9-2 Data Backup
Table 2-9-2 Description of Data Backup
database
Click the
Backup
, and save the database in your PC
dialplan
Click the
Backup
, and save the dialplan in your PC
exception
Click the
Backup
, and save the exception in your PC
